What is the difference between AthM50 vs AthM50s? I have purchased a pair of the Audio-Technica ATH-M50 recently because of a few recommendations. I am really glad I did! I have had and used several monitor headphones and the ATH-M50 can contend with or exceed the very best of them. Check This Out: Audio Technica ATH-M50 Review
You can see the difference between ATH-M50 vs ATH-M50s on the table above. (AthM50s vs AthM50)
The screw-off 1/4″ to 1/8″ plug is really a great touch and the Audio-Technica AthM50 are effective enough to be comfortably driven by a MP3 player. Not really that they need it, but add a good headphone amplifier and the specifics will turn out to be even more apparent.
| Type: | Closed-back dynamic |
| Magnet: | Neodymium |
| Sensitivity | 99 db |
| Impedance: | 38 ohms |
| Driver diameter: | 1.77" (45 mm) |
| Accessory included: | Protective pouch |
| Voice coil: | CCAW (Copper-clad aluminum wire) |
| Frequency response: | 15-28,000 Hz |
| Weight: | 10 oz. (284 g) without cable and connector |
| Cable: | 1.2 - 3.0 m (3.9' - 9.8') Straight, OFC litz wire |
| Maximum input power: | 1,600 mw at 1khz |
| Connector: | Gold-plated stereo 1/8" (3.5 mm) connector with strain relief and professional screw-on 1/4" (6.3 mm) adapter |
Continued burning-in will definitely make the Audio-Technica ATH-M50s sound even much better. I would not advise using any headphones to complete your final mixing with, but these come fairly darn close to what I hear out of my studio monitors.
P.S. Share this Review with Your Relatives, Friends and Colleagues
AthM50 vs AthM50s Review – Make a Gift to Someone
Use the Buttons Below:
